Last reviewed 16.11.2026, 09:00

Free Stresser — Free IP Stresser & Layer 4/7 Test

A free stresser is not a lite version of the paid tier. It is the same engine with a 120-second cap and a three-run daily quota.

Short answer: the free stresser gives you 3 runs per day, 120 seconds each, every Layer 4 and Layer 7 method, and the full report. The paid tier lifts the cap to 30 minutes per run and removes the daily quota. Capacity per second is identical.

What the free stresser includes

The free stresser tier is designed to let you run a real test against a real target without a credit card on file. Every feature that produces a usable measurement is present: target selection, method selection, duration control, live telemetry, the six-number report, and the downloadable time series.

What changes between free and paid is not what the tool does, it is how long you can do it and how often. A 120-second run is enough to find the first bottleneck on most targets. A 30-minute run is what you need to find the second, third and fourth bottleneck, because sustained pressure surfaces things a burst never touches: memory leaks that grow over ten minutes, connection-table entries that expire on a timer, timeout cascades that only appear after the first retry wave.

That distinction matters when you plan a test. If you are answering "does this service hold up under a spike," the free tier is enough. If you are answering "where does this service break over time," you need a sustained run, and that is the paid tier. The upgrade decision is not about capacity; it is about the shape of the question you are asking.

Free tier limits in numbers

Every limit below is measured from the moment the run starts, not the moment you click launch. Authorization checks and queue time do not count against the 120-second cap.

LimitFree stresserPaid tier
Runs per day3Unlimited
Duration per run120 seconds30 minutes
Layer 7 methodsAllAll
Layer 4 methodsAllAll
Report + time seriesIncludedIncluded
Run history retention30 daysIndefinite
Concurrent runs1Up to 4
Credit card requiredNoYes

The concurrent-run limit is the one most people miss. On the free stresser you can only have one run in flight at a time. If you want to test both Layer 7 and Layer 4 against the same target back-to-back, that is two separate runs, and each one counts against the three-run daily quota. On paid, you can launch both simultaneously, which is useful when you want to measure how the target behaves when both layers are pressured at once.

The history retention difference matters if you are running a longitudinal test: measuring the same target once a week for a month, then comparing the curves. On free you have 30 days of history, which covers a monthly cycle. On paid you keep everything, which is what you want if you are tracking a slow drift in capacity over a quarter.

What a free stresser report contains

The report is the same on free and paid. Six numbers and a time series. The six numbers are: total traffic volume (in bytes or packets depending on layer), peak packet rate, peak requests per second (Layer 7 only), error rate, timeout distribution (5xx, 4xx, connection reset, connection timeout), and the run duration actually achieved versus requested. The time series is a per-second data point for the whole run, exportable as CSV.

The time series is what you read first, not the peak numbers. A peak number tells you the highest point the run reached. The time series tells you the shape: did the target plateau cleanly, did it cliff and recover, did it cliff and stay down, did it climb slowly with no plateau at all. Those four shapes point at four different bottlenecks, and the peak number alone cannot distinguish between them.

What the report does not contain: a comparison against other targets, a score, a rating, or a recommendation. The free stresser measures your target and reports the measurement. It does not benchmark you against a fleet, because a fleet comparison would need to be normalized for target configuration and traffic mix, and the normalized data would be less useful than your own time series from run to run.

Free stresser authorization, step by step

Every free stresser run requires proof that the target IP is yours before the traffic goes out. The standard proof is a DNS TXT record: you add a record to the target domain that matches a token the platform gives you, and the platform checks the record before allowing the run. The token is unique per account and per target IP, and it can be revoked at any time.

The alternative proof is a control panel screenshot: a screenshot of your hosting provider's dashboard showing the target IP assigned to your account. This is the proof used when you do not control DNS for the target domain — for example, a VPS with an IP-only assignment and no domain. The screenshot is reviewed manually the first time and then cached for that IP.

What happens when the proof fails: the run does not launch. There is no partial run, no "quick test to verify ownership," and no bypass. A failed authorization is a hard stop, and it is checked every time the target IP changes, not just on the first run. That is the difference between a platform that respects authorization and a platform that treats it as a checkbox.

When to move from free to paid

Three signals tell you it is time to upgrade. First, you are hitting the three-run daily quota on most days, which means the test is part of your regular workflow and not a one-off. Second, you are regularly wishing the run was longer than 120 seconds, which means you have found the first bottleneck and want to find the next one. Third, you need two runs happening at the same time — both layers against the same target, or two targets in parallel — which the free tier does not allow.

If none of those apply, stay on free. The free stresser is not a demo that expires; it is a working tier with a permanent 120-second cap. If your target is stable and your tests are infrequent, the free tier will answer every question you have.

The upgrade itself does not change the report format, the method list, or the authorization flow. It changes the duration cap, the daily quota, the concurrent-run limit, and the history retention. The traffic engine behind the panel is the same, which is why the free stresser is worth trusting: the measurement you get on free is the same measurement you would get on paid, just shorter.

Frequently asked questions

Is the free stresser weaker than the paid tier?

No. The free stresser runs the same traffic engine as the paid tier. The only difference is duration and daily quota: 120 seconds per run and three runs per day on free, 30 minutes per run and unlimited runs on paid.

What does a free stresser run report contain?

Six numbers and a time series: total traffic volume, peak packet rate, peak requests per second, error rate, timeout distribution, and a downloadable time series of the full run.

What authorization does the free stresser require?

A DNS TXT record or control panel screenshot that ties the target IP to your account. The proof is checked before the first run launches and again whenever the target IP changes.

Can I run Layer 7 and Layer 4 on the free stresser?

Yes. Both layers are available on the free stresser tier. The full method set — HTTP flood, TLS flood, HTTP/2 flood, Slowloris, UDP flood, TCP SYN flood, TCP ACK flood, ICMP flood — is available on free.

When should I upgrade from the free stresser?

When the daily quota or the 120-second cap stops fitting. Sustained runs of 5 to 30 minutes surface memory pressure, connection-table exhaustion and timeout cascades that a 120-second burst never shows.

Does the free stresser keep run history?

Yes. Every free stresser run is logged with the target, method, duration and full report. History is kept for 30 days on the free tier and indefinitely on the paid tier.

How this page was researched

This page was written from the platform's own free-tier documentation and from the report format used by the same engine across tiers. The method list and the 120-second cap are checked against the launch controls on a live free account. The 30-minute cap and unlimited-run figures are from the paid-tier documentation. No number on this page is estimated.

Last reviewed: 16.11.2026, 01:00 (America/New_York).